DHT11 is a popular temperature and humidity-based digital sensor. There is an upgraded version of the DHT11 temperature and humidity sensor available, which is a DHT22 Sensor with higher sensing ranges.
The sensor uses a capacitive humidity sensor and a thermistor-based temperature sensor to measure the ambient humidity and temperature. The humidity sensing ranges from 20% to 90% with ±5% accuracy and the temperature sensing ranges from 0 degrees to 50 degrees Celcius with ±2°C accuracy. The sampling time of this sensor is 2 seconds almost. This Temperature and Humidity Sensor uses digital pins to communicate with the microcontroller unit and does not have any kind of analog pins.
The module also has the inbuilt pull-up resistor and additional filter capacitor to support the DHT11 sensor. Thus the module is available in ready-to-go mode and can be directly connected with the microcontroller unit without using any kind of additional components.
Pin Description:-
- Pin 1: Power VCC(+) (3.3VDC to 5.5VDC )
- Pin 2: Digital Serial Data Output
- Pin 3: Ground
DHT11 Sensor Specifications:
- Operating Voltage: 3.3V to 5.5V
- Digital I/O
- 5 Hz sampling rate (Once every 2 Seconds)
- Measuring current: 0.3mA
- Low power consumption
- Temperature range: 0 to 50 degrees C
- Humidity range: 20% to 90%
- Accuracy: ±2°C and ±5%
- Dimension: 3.5 x 2 x 6.5 cm
Additional Resources:
- DHT11 Sensor Datasheet
- Arduino Library-DHT11-Adafruit
- Interfacing DHT11 with PIC
- Arduino-based automatic AC temperature control using DHT11
- ESP32 Based Web Server for Temperature and Humidity Measurement using DHT11 Sensor
Package Includes:
1 x DHT11 Temperature and Humidity Sensor Module