1000uF 16V Electrolytic Capacitor – Radial Aluminium Electrolytic Capacitor
The 1000uF 16V Electrolytic Capacitor is a polarized, radial-leaded aluminium electrolytic capacitor intended for through-hole PCB assembly. The supplier reference identifies the 1000 µF capacitance and 16 V voltage rating. This type of capacitor is commonly used for DC filtering, decoupling, smoothing and energy-storage functions in low-voltage electronic circuits.
Key Features
Capacitance: 1000 µF
Voltage rating: 16 V
Polarized aluminium electrolytic construction
Radial through-hole leads
Supplier/reference series: HYNCDZ
Case information: D8 × L16 mm
Applications
DC power-supply smoothing
Ripple reduction after rectification
Power-rail decoupling and bulk capacitance
Audio and amplifier circuits
Arduino, embedded and hobby electronics
General through-hole PCB designs
Polarity & Safe Usage
Electrolytic capacitors are polarized. Observe the positive and negative markings during installation. Do not apply a voltage above the rated voltage, and do not reverse the polarity. For designs exposed to significant ripple current, switching converters or elevated temperatures, select a capacitor using its actual datasheet ripple-current and lifetime ratings.
How to Choose the Right Value
Capacitance determines the amount of charge the capacitor can store and influences filtering response. The voltage rating should be higher than the maximum steady-state and transient voltage expected on the rail. For a replacement, match both capacitance and voltage rating and confirm the physical lead spacing/case size.
Frequently Asked Questions
Is this capacitor polarized?
Yes. It is an aluminium electrolytic capacitor and must be installed with the correct polarity.
Can I use a higher voltage rating?
Usually yes, provided the capacitance, physical size, electrical characteristics and circuit requirements remain suitable. Never substitute with a lower voltage rating.
Can I connect it directly across a DC supply?
Yes, when the polarity and voltage rating are correct and the circuit does not exceed the capacitor specified operating conditions.
Is this suitable for high-frequency switching?
It can provide bulk filtering, but high-frequency switching designs may also require a suitable low-ESR capacitor or ceramic capacitor close to the switching device.
What is the physical size?
The reference gives the case information as D8 × L16 mm.
Buy 1000uF 16V Electrolytic Capacitor Online in India
LearnElectronics India offers this radial electrolytic capacitor for electronics repair, prototyping, embedded systems, power supplies and educational projects.