Usha Saha
Aug 19, 20203 min
Updated: Apr 4
This article Controlling Raspberry Pi's GPIOs using the Telegram bot is all about how one can control the Raspberry Pi's #GPIOs(General Purpose Input/Output's) with a telegram bot. Let's have some idea about what is a Telegram bot. The Telegram bot is basically a platform provided by telegram where the #telegram is controlled by software rather than manually. The bot can perform functions like search, remind, teach, broadcast, and many more. So let's get headed towards the article and the codes implemented.
The list of components used are shown below;
Raspberry Pi 3 Model B+
The Raspberry Pi is a series of small single-board computers. Here 3 Model B+ indicates the generation of the RPi board. The Raspberry Pi is also written as RPI or RPi or Raspberry Pie. The Raspberry Pi Model B+ is of the nearby size of a credit card.
Bread Board:- A breadboard is a rectangular board with small holes in it which are used for connecting elements. The connections are not fixed and can be varied. In a breadboard, all the holes in one horizontal line are in series connection with each other. Breadboards are made from plastic and come in all shapes, sizes, and even different colors, the most common sizes are "full-size," "half-size," and "mini" breadboards.
Jumper wires:- Jumper wires are used to establish a connection between different elements in the circuit and #Raspberrypi board. There are two types of wire, male and female. The male wires have the ends that can be connected to other ends and the female wires are the ones that have the receiving end.
USB Cable
This cable is used to connect the RaspberryPi to the power supply. It also helps in the transmission of data.
LED:- A Light Emitting Diode is a semiconductor device that emits light when current flows through it.
The circuit connections are very easy to understand. Here the GPIO pins are connected to the anode of the two LEDs. The #GPIO 17 and 27 pins are connected to the two anode pins of the green and red led respectively. The cathode terminal of the diodes is grounded on the breadboard along with the negative terminal of the Raspberrypi board.
To start with download the telegram application form the play store, sign in making an account, and search for the #BotFather account. Under this click on start and this will initiate the process of creating the bot. On the left-hand side on can see the control commands from there choose the /newbot to create a new bot and furnish a few details like the name, username for the bot, and done with the bot creation process.
In this article, the working is based on fetching the keywords form the text that had been entered in the application. The next step is to open the newly created bot and start the session. With the program running in the background enter text like turn on/off any specific led and see the output on the led. Let us have a view on the implementation part.
For a better understanding lets understand with the help of images. The first image command to turn on the green led.
As a response to the command, the green led turns on.
Similarly, the next command would be to turn on the red led.
Responding to the command the red led turns on.
Turn off all the led command.
Both the LEDs are turned off.
Turn on both the LED's command.
Both the LEDs are turned ON.
In the same way, one can design for any other commands also like turn off one led. Turn off green led, or turn off red led and check for the outputs. If having any doubt go through the video configuration, the link is given below.
Check the project working video here - Controlling Raspberry Pi's GPIOs using the Telegram bot | Raspberry Pi Board | Learn Electronics
To sum up, through the article #Controlling Raspberry Pi's GPIOs using the Telegram bot one would learn how to connect the telegram bot in the mobile with the Raspberry Pi's along with how to command the Raspberry Pi's GPIOs and make actions more automated.
To learn more of such similar projects visit the links below
Interfacing servo motor with RPi